Green Flash™ Welcome Kit

This ready-to-go kit has all our must-haves for applying and removing your Green Flash LED nail polish.

Green Flash™ Base Coat

Apply this protective coat to bare nails.

Green Flash™ Top Coat

Apply it over your Green Flash™ colour to make your manicure shine and last longer.

Nail Polish Remover & Nail Clips

Place a cotton pad soaked in remover on each nail to remove your Green Flash™ manicure in just 1 minute.

Premium 36W LED Lamp / 24W LED Lamp

Use it to dry (cure) each coat.

• Shine & staying power for up to 10 days
• Express removal
• Clean at-home solution
• 12-free

Fast and easy application in 3 steps

Step 1: Green Flash™ Base Coat

Apply thin layer Base Coat. Use LED Lamp to dry by clicking the button labeled "BASE" (1 minute).

Step 2: Green Flash™ Color

Apply thin layer of Color. Use LED Lamp to dry by clicking the button labeled "COLOR" (1 minute). Repeat for 2nd color layer.

Step 3: Green Flash™ Top Coat

Apply thin layer of Top Coat. Use LED Lamp to dry by clicking the button labeled "TOP" (2 minutes).

PRO TIP: For each layer, be sure to go over the top edge of the nail with polish to seal and ensure longer wear time!

And the removal? No drilling, no damage! Apply a cotton pad soaked in Green Flash™ Acetone-Free Remover on each nail. Hold cotton pad in place for 1-2 minutes with our nail clips. Voila!

Green Flash™ Base, Top Coat & Colors

Glass Bottle: Emptied, cleaned and dried bottles can either be reused or placed in a recycling bin separate from other materials to avoid contamination. If your local municipality does not accept glass for recycling, bottles can be brought to a collection center. No need to remove labeling.

Plastic Cap (Plastic-type #5 - Polypropylene): Clean and remove cap from brush attachment and place in recycling bin or bring to a local collection center.

Nail Brush (Plastic-type #4 - Low Density Polyethylene): Clean and remove cap from brush and place in recycling bin or bring to a local collection center.

Label: No need to remove label as glass recycling processes will remove any labelling

Green Flash™ Nail Clips

White Clips (ABS Plastic type #7- Acrylonitrile Butadiene Styrene) : Separate white ABS from metal apperatus on clips. ABS can be placed in recycling bin but should be kept separate from other types of plastic to avoid contamination.

Metal: Metal pieces can be added to recycling bin or taken to a local collection center.

Green Flash™ Remover

Glass Bottle: Emptied, cleaned and dried bottles can either be reused or placed in a recycling bin separate from other materials to avoid contamination. If your local municipality does not accept glass for recycling, bottles can be brought to a collection center. No need to remove labeling.

Plastic Cap (Plastic-type #5 - Polypropylene): Clean and remove cap from brush attachment and place in recycling bin or bring to a local collection center.

Label: No need to remove label as glass recycling processes will remove any labelling

As always, verify your local municipality's recycling regulations and procedures and for more information please go to berecycled.org/search or search.earth911.com

Green Flash™ Lamp

UV Lamps contain Mercury so their waste is potentially dangerous.

EPA reports UV bulbs must be recycled in these states: Cali, Maine, Mass,Minn, NH, VT, WA.

Check on Earth911 website to locate a local recycling solution or check at Home Depot, Lowe's and ACE hardware who now offer recycling programs for hard to recycle materials.

2-year warranty lamp

To ensure your lamp continues to light up your Green Flash™ routine, all our lamps come with a 2-year warranty. So now you can Flash with
peace of mind! 💫

Green Flash™ Base Coat

Ethyl acetate, butyl acetate, polyvinyl butyral, bis-hema poly(1,4-butanediol)-9/ipdi copolymer, tosylamide/epoxy resin, styrene/acrylates copolymer, ethyl trimethylbenzoyl phenylphosphinate, tributyl citrate, isopropyl alcohol, phosphoric acid, bht

80,5% plant-based

Green Flash™ Top Coat

ethyl acetate, butyl acetate, acrylates copolymer, HEA/IPDI isocyanurate trimer/polycaprolactone diol copolymer, nitrocellulose, acetyl tributyl citrate, tris-HEA IPDI isocyanurate trimer, adipic acid/neopentyl glycol/trimellitic anhydride copolymer, hydroxyethyl acrylate/IPDI/PPG-15 glyceryl ether copolymer, isopropyl alcohol, ethyl trimethylbenzoyl phenylphosphinate, CI 60725

60.5% plant-based

Green Flash™ Nail Polish Remover

ethyl acetate, alcohol denat., ricinus communis seed oil, parfum, etocrylene, butyl acetate, CI 61565, CI 47000

97% plant-based